|
300/4v2 Class A/B Four-Channel Full-Range Amplifier
Features:
| |
300/4v2 |
| |
|
| Description: |
Class A/B Four-Channel Full-Range Amplifier |
| Patented Technology: |
Absolute Symmetry™ Class A/B Circuit (U.S. Patent #6,294,959) |
| Differential-Balanced
Input Topology: |
2 pair of inputs |
| On-board Crossover: |
Fully-variable (50 Hz - 5 kHz), selectable-slope / mode (12 or 24 dB / octave, LP or HP) for each pair of channels |
| Speaker output connections: |
Accept up to 8 AWG wire |
| +12V and Ground connections: |
Accept up to 4 AWG wire |
| Notes: R.I.P.S. Regulated, Intelligent Power Supply, RealSink™ Heat-Management System |
Click here to download the owner's manual (PDF).
300/4v2 Class A/B Four-Channel Full-Range Amplifier
Specifications:
| |
300/4v2 |
| Rated Power (4 Channel Mode): |
75 W RMS x 4 @ 1.5 ohm-4 ohm (11V-14.5V) |
| Rated Power (Bridged to 2 Channel): |
150 W RMS x 2 @ 3 ohm-8 ohm (11V-14.5V) |
| THD at Rated Power: |
<0.03% @ 4 ohm per ch. |
| S/N Ratio: |
>108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Frequency Response: |
5 Hz - 30 kHz (+0, -1dB) |
| Damping Factor: |
>200 @ 4 ohm per ch. / 50 Hz
>100 @ 2 ohm per ch. / 50 Hz |
| Slew Rate: |
±25 V / µS @ 4 ohm per ch. |
| Left to Right Channel Separation: |
>75 dB @ 1 kHz |
| Input Range: |
Switchable from 200mV-2V RMS to 800mV-8V RMS |
| Dimensions
(L x W x H): |
13.40 in. x 9.25 in. x 2.36 in.
340 mm x 235 mm x 60 mm |
|
