|
HD600/4 Class D Four-Channel Full-Range Amplifier
Features:
| |
HD600/4 |
| |
|
| Description: |
Class D Four-Channel Full-Range Amplifier |
| Patented Technology: |
Single Cycle Control™ (U.S. Patent #6,084,450*) |
| Differential-Balanced
Input Topology: |
2 pairs of inputs |
| On-board Crossover: |
State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley, Low-Pass or High-Pass for each pair of channels |
| Speaker output connections: |
Accept up to 12 AWG wire |
| +12V and Ground connections: |
Accept up to 4 AWG wire |
Notes: R.I.P.S. Regulated, Intelligent Power Supply, RealSink™ Heat-Management System,
*Patented technology used under exclusive license for mobile audio from PowerPhysics, Inc. - Newport Beach, CA |
Click here to download the owner's manual (PDF).
HD600/4 Class D Four-Channel Full-Range Amplifier
Specifications:
| |
HD600/4 |
| Rated Power (4 Channel Mode): |
150 W RMS x 4 @ 1.5 ohm-4 ohm (11V-14.5V) |
| Rated Power (Bridged to 2 Channel): |
300 W RMS x 2 @ 3 ohm-8 ohm (11V-14.5V) |
| THD at Rated Power: |
<0.03% @ 4 ohm per ch. |
| S/N Ratio: |
>110 dB below rated power
(A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Frequency Response: |
6 Hz - 30 kHz (+0, -1dB) |
| Damping Factor: |
>300 @ 4 ohm per ch. / 50 Hz
>150 @ 2 ohm per ch. / 50 Hz |
| Input Range: |
Switchable from 200mV-2V RMS to 800mV-8V RMS |
| Dimensions
(L x W x H): |
10.74 in. x 8.29 in. x 1.93 in.
273 mm x 211 mm x 49 mm
(Width Measurement Includes Plugs) |
|
