JL Audio VR600-CSi Evolution Car Audio Speakers

VR600-CSi Component Systems Specifications:

	VR600-CSi Component Systems

Description:	Evolution™ VR 6.0 in. / 150 mm: 6.0 in. / 150 mm Woofer; 0.75 in. / 19 mm Silk Dome Tweeter, Grilles Included Finally, a premium two-way component system that fits perfectly into many Japanese automobiles without cutting or modifying the factory speaker locations. Strong midbass capabilities, combined with very clean upper frequency output make the VR600-CSi a perfect choice for the serious car audiophile.
Woofers:	Injection-molded, mica-filled, polypropylene cone body, 1.0 in. / 25 mm voice coil, flat-profile/ symmetrical-roll spider, butyl rubber surround.
Tweeters:	0.75 in. / 19 mm silk soft dome tweeter, neodymium magnet, ferrofluid cooled and damped. Variable mounting system with swivel/rotation capability.
Crossover Networks:	2-way network with 1st order low-pass circuit and 2nd order high pass circuit. Premium Mylar Capacitors and Air-Core inductors. Adjustable tweeter output level. Polyswitch tweeter protection
Continuous Power Handling:	60 Watts
Rec. Power Range (per channel):	15 - 100 Watts
System Efficiency:	89.0 dB @ 1W/1m
System Nominal Impedance:	4 ohms
System Frequency Response:	59 Hz - 25 KHz ±3 dB
NOTES:

VR600-CSi Component Systems Physical Specifications :

WOOFER PHYSICAL SPECIFICATIONS
Woofer Frame Outer Diameter* (A)	6.21 in. / 157.7 mm
Woofer Grille Tray Outer Diameter** (B)	6.44 in. / 163.6 mm
Woofer Magnet Outer Diameter (C)	3.15 in. / 80.0 mm
Frontal Coaxial Tweeter Protrusion*** (D)	N/A
Woofer Frontal Grille Protrusion**** (E)	0.83 in. / 21.0 mm
Woofer Mounting Hole Diameter (F)	5.00 in. / 127.0 mm
Woofer Mounting Depth (G)	2.38 in. / 60.3 mm
Does not take into account mounting tabs Does not take into account logo badge Frontal coaxial tweeter protrusion measured from mounting surface **Frontal grille protrusion measured from mounting surface

Tweeter PHYSICAL SPECIFICATIONS
Flush Mount Fixture Diameter (A)	1.69 in. / 42.8 mm
Flush Mount Trim-Ring Diameter (B)	2.04 in. / 51.8 mm
Flush Mount Mounting Hole Diameter (C)	1.50 in. / 38.2 mm
Flush Mount Mounting Depth (D)	0.57 in. / 14.5 mm
Surface Mount Fixture Diameter (E)	15.6 in. / 39.7 mm
Surface Mount Protrusion (F)	0.87 in. / 22.1 mm

Crossover PHYSICAL SPECIFICATIONS
Height (A)	4.74 in. / 120.4 mm
Width (B)	3.15 in. / 80.0 mm
Depth (C)	1.10 in. / 27.9 mm

Search the Site

The JL Audio online store is available
to customers in these countries only.

Please select from the following:

Making sure cookies are enabled in your web browser
will ensure you only see this page once.

The JL Audio online store is available
to customers in these countries only.

Please select from the following:

Making sure cookies are enabled in your web browser
will ensure you only see this page once.