JL Audio VR525-CSi Evolution Car Audio Speakers

VR525-CSi Component Systems Specifications:

	VR525-CSi Component Systems

Description:	Evolution™ VR 5.25 in. / 130 mm Component Systems: 5.25 in. / 130 mm Woofer, 0.75 in. / 19 mm Silk Dome Tweeter, Grilles Included "...natural spectral balance and breathtakingly realistic sound quality." were the words chosen by Car Stereo Review to describe our affordable 5.25-inch 2-way component system. (They also said it was better sounding than a well-known $2000 system.)
Woofers:	Injection-molded, mica-filled, polypropylene cone body, 1.0 in. / 25 mm voice coil, flat-profile/symmetrical-roll spider, butyl rubber surround.
Tweeters:	0.75 in. / 19 mm silk dome tweeter, neodymium magnet, ferrofluid cooled and damped. Variable mounting system with swivel/rotation capability.
Crossover Networks:	2-way network with natural low-pass roll-off and 4th order high-pass circuit. Premium Mylar Capacitors and Air-Core inductors. Adjustable tweeter output level. Polyswitch tweeter protection.
Continuous Power Handling:	60 Watts
Rec. Power Range (per channel):	15 - 100 Watts
System Efficiency:	87.5 dB @ 1W/1m
System Nominal Impedance:	4 ohms
System Frequency Response:	63 Hz - 25 KHz ±3 dB
NOTES:

VR525-CSi Component Systems Physical Specifications :

WOOFER PHYSICAL SPECIFICATIONS
Woofer Frame Outer Diameter* (A)	5.20 in. / 132.0 mm
Woofer Grille Tray Outer Diameter** (B)	6.01 in. / 152.6 mm
Woofer Magnet Outer Diameter (C)	2.76 in. / 70.0 mm
Frontal Coaxial Tweeter Protrusion*** (D)	N/A
Woofer Frontal Grille Protrusion**** (E)	0.83 in. / 21.0 mm
Woofer Mounting Hole Diameter (F)	4.56 in. / 115.8 mm
Woofer Mounting Depth (G)	2.50 in. / 63.5 mm
Does not take into account mounting tabs Does not take into account logo badge Frontal coaxial tweeter protrusion measured from mounting surface **Frontal grille protrusion measured from mounting surface

Tweeter PHYSICAL SPECIFICATIONS
Flush Mount Fixture Diameter (A)	1.69 in. / 42.8 mm
Flush Mount Trim-Ring Diameter (B)	2.28 in. / 57.8 mm
Flush Mount Mounting Hole Diameter (C)	1.50 in. / 38.2 mm
Flush Mount Mounting Depth (D)	0.57 in. / 14.5 mm
Surface Mount Fixture Diameter (E)	1.56 in. / 39.7 mm
Surface Mount Protrusion (F)	0.87 in. / 22.1 mm

Crossover PHYSICAL SPECIFICATIONS
Height (A)	4.74 in. / 120.4 mm
Width (B)	3.15 in. / 80.0 mm
Depth (C)	1.10 in. / 27.9 mm

Search the Site

The JL Audio online store is available
to customers in these countries only.

Please select from the following:

Making sure cookies are enabled in your web browser
will ensure you only see this page once.

The JL Audio online store is available
to customers in these countries only.

Please select from the following:

Making sure cookies are enabled in your web browser
will ensure you only see this page once.