JL Audio ZR650-CSi Evolution Car Audio Speakers

ZR650-CSi 2-Way Component Systems Specifications:

	ZR650-CSi 2-Way Component Systems

Description:	Evolution® ZR 6.50 in. / 165 mm 2-Way Component Systems: 6.50 in. / 165 mm Woofers; 1.0 in. / 25 mm Aluminum Dome Tweeters This new range of reference component systems fully demonstrates JL Audio's obsession with accurate sound reproduction.
Woofers:	Custom-engineered, proprietary cast aluminum woofer baskets were designed to provide maximum rear open area while also incorporating JL Audio's patented "Elevated Frame" cooling system. This cooling technology, shared with JL Audio's W7 subwoofers, allows air to flow directly across the top-plate and onto the voice coil windings to greatly improve linearity at all listening levels.
Tweeters:	1.0 in. / 25 mm aluminum dome tweeter
Crossover Networks:	All of these quality components are enclosed in a newly designed, polycarbonate case with a classy metal "ZR" logo that will look at home in any high-end installation.
Continuous Power Handling:	85 Watts
Peak Music Power:	255 Watts
Rec. Power Range (per channel):	25 - 175 Watts
System Efficiency:	89.5 dB @ 1W/1m
System Nominal Impedance:	4 ohms
System Frequency Response:	48 Hz - 25 KHz ± 3 dB
NOTES:

ZR650-CSi 2-Way Component Systems Physical Specifications :

WOOFER PHYSICAL SPECIFICATIONS
Woofer Frame Outer Diameter* (A)	6.52 in. / 165.6 mm
Woofer Grille Tray Outer Diameter** (B)	6.76 in. / 171.7 mm
Woofer Magnet Outer Diameter (C)	3.54 in. / 90.0 mm
Frontal Coaxial Tweeter Protrusion*** (D)	N/A
Woofer Frontal Grille Protrusion**** (E)	0.98 in. / 24.9 mm
Woofer Mounting Hole Diameter (F)	5.56 in. / 141.3 mm
Woofer Mounting Depth (G)	2.65 in. / 67.3 mm
Does not take into account mounting tabs Does not take into account logo badge Frontal coaxial tweeter protrusion measured from mounting surface **Frontal grille protrusion measured from mounting surface

Tweeter PHYSICAL SPECIFICATIONS
Flush Mount Fixture Diameter (A)	1.90 in. / 48.3 mm
Flush Mount Trim-Ring Diameter (B)	2.13 in. / 54.0 mm
Flush Mount Mounting Hole Diameter (C)	1.66 in. / 42.1 mm*
Flush Mount Mounting Depth (D)	0.453 in. / 11.5 mm*
Surface Mount Fixture Diameter (E)	1.82 in. / 46.2 mm
Surface Mount Protrusion (F)	0.85 in. / 21.6 mm
* Enhanced Flush Cup Mounting Hole Diameter is 1.72 in. / 43.5 mm and Enhanced Flush Cup Mounting Depth is 0.404 in. / 10.3 mm

Crossover PHYSICAL SPECIFICATIONS
Height (A)	5.84 in. / 148.2 mm
Width (B)	4.17 in. / 105.8 mm
Depth (C)	1.72 in. / 43.7 mm

Sign-up for updates

The JL Audio online store is available
to customers in these countries only.

Please select from the following:

Making sure cookies are enabled in your web browser
will ensure you only see this page once.